Last updated: Wed May 12 14:13:13 PDT 1999

Project: ESI
Stage: Hatch
ID #: KEWN-001

Required setting accuracy :

**Performance requirements and design goals**
Component	Requirements 1
Motor:-	-
Gearbox:-	-
Limits 2: Bimba reed switch #MRS-.087-XBL-02	Two (2) per cylinder
Fiducials:-	-
Encoders:-	-
Air Cylinders: One (1)	Bimba M-0612-D
Air Solenoids: One (1)	Honeywell #73419AN2NN00M1J011C2 24 Volt DC
Lock/Clamp/Brake:-	-
Interlocks:-	-

Speed, temperature, accuracies, electrical power, pressurized air, lubricant, coolant, N2 purge, ...
Primary (inner) and secondary (outer) limits. These can be magnetic, optical, or physical contact

NOTES:

**Manufacturer's specifications and limitations**
Component	Maximum Operating Condition	Safe Ops Condition	Requirements
Motors:	-	-	-
Limits:	-	-	-
Fiducials:	-	-	-
Encoders:	-	-	-
Air Cylinders:	-	-	-
Air Solenoids:	-	-	-
Lock/Clamp/Brake:	-	-	-

Final Mechanical Assembly and Testing Results

Air Cylinders:
Air Solenoids:

Air pressure: 35 PSI minumum

NOTES:

Mechanical Drawing(s) # E6700

Electronic Drawing(s) # EL-3380