EL-3116Cradle Signals
The cradle signal assignment section of this manual contains descriptions of the signal assignments for the DEIMOS Spectrograph. It corresponds to the Cradle Signal Assignment tab in the electronics schematics binder.
Temperature Connector Signal Assignments,
EL-3116
Schematic: schematics/JTEMP.SCH.pdf
Page last updated:
January 31, 2003
SCREW |
SIGNAL |
CPC PIN |
IDC-14 PIN |
70 |
CONTROL 1 |
JT-1 |
2 |
71 |
CONTROL 2 |
JT-2 |
4 |
72 |
CONTROL 3 |
JT-3 |
6 |
74 |
GND |
JT-4 |
1,5 |
75 |
ANALOG 1 (CHANNEL A) |
JT-5 |
9 |
- |
ANALOG 1 (CHANNEL B)* |
JT-6 |
13* |
76 |
ANALOG 1 (CHANNEL C) |
JT-7 |
11 |
89 |
ANALOG GND |
JT-8 |
10,14 |
*NOT USED - FAST INPUT USED FOR RENISHAW ENCODER INPUT
This table shows the wiring between the screw terminals and CPC connector on the Galil amplifier board and the IDC connector that plugs into the EL-1230 Analog input card.